5M 300 RGB LED Smart Strip, IP67


5M 300 RGB LED Smart Strip, IP67
Stock Number: 38558 OP
  Be the first to review this item
$10.95


This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.
This item is no longer available


SHARE
    
     Email this to a friend     

Detailed Description

View PDF Data Sheet
DATA SHEET


No Controller/Power Supply-Strip Only
Flexible, IP-67, RGB LED Smart strip with 300, individually controllable Smart 5050SMD RGB LEDs with internal control WS2812B Chip (Data Sheet on Our Website "Support Files".)
5 meter reel with 3-pin JST-SM connector on each end and separate power/ground wires.
Note: Requires a 5VDC Output Controller or micro computer (Arduino/-Pi etc.)
We Do Not Provide Programming.
Information can be found by Searching "NeoPixel" or "arduino ws2812b library" on the WEB

Power Supply: Output: 5VDC @ ~60mA/Section ~ 3.6A/m all LED active. (5m strip can be close to 20A)
LED Strip: Single Row, 60 Total LEDs/m
1 LED/Section, 60 Sections/meter
Wavelength: R:625nm G:520nm B: 465nm
Intensitity: R: ~300mcd, G: ~500mcd, B: ~200mcd
Cutable at 16.5mm (~11/16") (section length)
Minimum Length: 1 Section
Minimum # Active LEDs: 1
Viewing angle: 120°
Protection: IP67 Waterproof cover (If Cut you must Seal to maintain IP67)
Connection: 4" wire leads for additional 5VDC
3-1/2" Wire with 3 pin Male JST-SM on 1 end and 3Pin Female JST-SM on other end (+,- & Data)
L: 5M W: 12.5 mm (With Protective Cover) WT: .5


California Proposition 65 Warning WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
(This item was manufactured prior to August 31st, 2018)